HW lan HWT Casing

Katrangan singkat:

Penawaran TDS Wire Line Casing kalebu desain 'W' standar industri ing kabeh ukuran uga desain 'WT' sing umum digunakake ing produk diameter sing luwih gedhe.Pipa baja karbon, diprodhuksi miturut spesifikasi pipa Di-Corp njamin produk sing angel, kuwat, lurus, konsentris.Kabeh Casing wis presisi machined kanggo standar ISO industri mesthekake kualitas gabungan pas uga kompatibilitas karo produk industri ana.

Pesen Email

Detail Produk

Tag produk

Casing		BW	NW	HW	HWT	PWT
Dhiameter njaba OD	mm (ing)	73.03 (2.88)	88.90 (3.50)	114.30 (4.50)	114.30 (4.50)	139.70 (5.50)
Inner diameteripun ID - Pundhak kothak	mm (ing)	60.33 (2.38)	76.20 (3.00)	101.60 (4.00)	101.60 (4.00)	127.00 (5.00)
Ketebalan tembok	mm (ing)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)
Panjang ujung pin	mm (ing)	63.50 (2.50)	69.85 (2.75)	76.20 (3.00)	63.50 (2.50)	63.50 (2.50)
Utas pitch	mm (ing)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	10.16 (0.40)	10.16 (0.40)
Bobot	kg/m (lb/ft)	11.71 (7.87)	12.96 (8.71)	16.95 (11.39)	16.95 (11.39)	20.94 (14.07)
Volume isi casing	L/m (gal/ft)	4.19 (0.34)	4.56 (0.37)	8.11 (0.65)	8.11 (0.65)	12.67 (1.02)
Volume bolongan	L/m (gal/ft)	4.45 (0.36)	6.62 (0.53)	10.84 (0.87)	10.84 (0.87)	16.18 (1.30)
Volume annulus casing/lubang	L/m (gal/ft)	0.27 (0.02)	0.41 (0.03)	0.58 (0.05)	0.58 (0.05)	0.85 (0.07)
Min kekuatan ngasilake	MPa (psi)	524,00 (76000,00)	524,00 (76000,00)	524,00 (76000,00)	524,00 (76000,00)	524,00 (76000,00)
Min kekuatan tarik	MPa (psi)	599,84 (87000,00)	599,84 (87000,00)	599,84 (87000,00)	599,84 (87000,00)	599,84 (87000,00)
Volume pamindahan	L/m (gal/ft)	1.33 (0.11)	1.65 (0.13)	2.15 (0.17)	2.15 (0.17)	2.66 (0.21)
Tekanan burst - pundhak kothak	MPa (psi)	30.30 (4394.78)	24.24 (3515.00)	19.56 (2837.33)	14.98 (2172.33)	12.25 (1777.36)
Tekanan burst - midbody	MPa (psi)	79.74 (11565.22)	65,50 (9500,00)	50.94 (7388.89)	50.94 (7388.89)	41.68 (6045.45)
Tekanan ambruk - midbody	MPa (psi)	72.81 (10559.55)	60.82 (8821.43)	48.11 (6978.40)	48.11 (6978.40)	39.79 (5770.66)

Data geometris standar adhedhasar nilai industri sing diterbitake kaya sing diterangake ing Standar Internasional kanggo ISO 10097-2.Sawetara nilai sing direkam diwilang dening Departemen Teknik TDS.Perawatan lan penanganan, uga kahanan pengeboran, praktik lan peralatan sing digunakake, uga bakal duwe peran penting ing kapasitas lan kinerja sing paling dhuwur.